Concrete Floor Coating Service in Leander, TX

The quality of a concrete coating begins with the concrete beneath it. While high-quality coating products may provide excellent results, they cannot achieve their potential if placed over improperly prepared (and therefore poorly adhered) concrete surfaces. For this reason, surface preparation is perhaps the largest factor contributing to a floor that will continue to endure over time.

At Leander Epoxy Flooring, our process for preparing the floors for coating starts with examining the condition of the existing slab and identifying areas of concern prior to commencing the installation. Dirt, grease, dust, old coatings or other contaminants can negatively impact adhesive properties, so all impurities need to be completely removed from the surface. In addition, cracks and damaged sections of the slab can be repaired during this stage.

Following completion of these repairs, the slab undergoes mechanical preparation to develop a surface profile for the coating. This provides a bonding area for the new flooring system instead of just placing the new flooring directly onto the smooth face of the original slab. Developing a good bonding relationship between the slab and the coating through thorough surface preparation increases durability of the flooring system.

While surface preparation is typically not visible after an epoxy-coated floor has been completed, it is arguably the most critical phase of an epoxy flooring installation. Properly completing this phase reduces the likelihood of adhesion problems and creates a solid base for dependability and durability throughout the life of your coated floor.

A new coating can enhance the aesthetic appeal of your garage or workshop floor. However, no coating will instantly eliminate all underlying issues within your concrete floor. There are many possible issues such as cracks, chips, damaged areas and unevenness which could impact how well both the finish of the floor appears and performs. Fixing these potential issues prior to installing the coating provides the coating with a more even surface to coat on and results in a better looking and performing final product.

When we evaluate the condition of your concrete at Leander Epoxy Flooring, this is a critical component of our preparation phase. During this evaluation we determine if there are certain areas of damage (asphalt, oil stains, etc.) that should be addressed prior to moving ahead with the coating system. In creating a more smooth and stable base for the finished flooring, you create a good environment where the finished floor will adhere properly and perform for years to come.

As concrete ages, it naturally deteriorates. Traffic, moisture, movements and years of use can cause concrete to crack and exhibit other types of deterioration. This type of deterioration is very common in older garages, workshops, warehouses, commercial spaces etc. Coating over these deterioration spots will do little to correct them; rather they have to be corrected during the preparation process so they do not compromise the finished appearance of the epoxy.

Correcting deficiencies or damages in your concrete floor prior to applying the coating ensures that your entire flooring system begins with a solid base. Your final product will be much cleaner and more uniform and prepared for daily use as well as dependability for years to come.

At this point in the process, once all needed prep work has been completed and the concrete has reached the desired consistency, the actual structure of the new floor begins to take form. The concrete slab now becomes a much cleaner and functional area for daily use. While the finished coating is often the first thing seen, the prep work done under the finishing coat is very important to how well the final product will perform.

We at Leander Epoxy Flooring determine which epoxy coating products should be installed in our customers’ properties based on their specific uses. For example, a typical homeowner garage might require a coating that can withstand the weight of occasional vehicle usage as well as potential spills. In contrast, a commercial garage, manufacturing facility, or warehouse would have a greater volume of foot traffic and/or heavy equipment usage. As such, we believe matching the epoxy product to the intended usage of the respective areas creates an overall surface that can better withstand common sources of damage like water/moisture, stains, abrasions, and other forms of wear associated with general use.

This is also when homeowners/property managers are able to customize the aesthetic appearance of the finished floors. There are many different color combinations available, decorative flake options, texture finishes and gloss levels; thus allowing for virtually unlimited design options ranging from plain and unassuming to uniquely distinctive designs. We will assist you in selecting one that complements its surroundings while also meeting the demands of your property.

Once applied, the epoxy coating requires ample time to fully cure prior to returning to normal usage patterns. After curing, you will be left with a beautifully finished surface that is more easily cleaned, visually appealing and offers greater protection than its underlying bare concrete. When properly installed, an epoxy coated floor can produce both an instant visual renovation as well as long term functionality advantages.

After the coating has been applied, it needs time to cure before the floor is ready for regular use. Proper curing allows the coating system to fully bond with the concrete and develop the durability it was designed to provide. The amount of time required can vary depending on the specific coating system, environmental conditions, and the scope of the project.

Once the curing process is complete, the floor is inspected to ensure the finish is consistent and that all areas of the installation meet expectations. This final review helps confirm that the coating has been applied properly and that the finished floor is ready for everyday use.

While it can be tempting to put the space back into service immediately, allowing the floor adequate time to cure is an important part of achieving the best possible long-term results. A properly cured floor will perform better, last longer, and provide the durability and appearance property owners expect from a professional concrete coating system.

When a project is complete, we conduct a walk-through of the entire area to assess the appearance and make sure the finish is consistent across the floor. We will inspect all aspects of the job, including color, sheen, etc., to verify the floor meets the standards we set for ourselves at Leander Epoxy Flooring.

Attention to detail does not end at completion of application. We have no problem taking care of any adjustments that may need to be made after application as long as they do not add additional cost. Our final inspection is important to ensure the customer gets a floor that looks professional and is going to meet the demands of their space.

In addition to ensuring the customers receive a quality floor; we also strive to leave their property clean. After completing the job we remove tools, equipment, leftover materials and all project debris from the work area so the customer is not left cleaning up. Once the recommended curing time has elapsed, the customer can begin using the space again.

A quality finished floor and excellent service experience are two things that should always go hand in hand. That is why our staff strives to provide both during every phase of your flooring project, from preparation through the final walk-though and cleanup. At the end of this process, we hope to have created a durable, attractive concrete floor that will function well on your Leander property.